First of all, there should be a case with a length of about 3M. The total length of the cloth is known and the end space, word space and size have been calculated. In order to straighten the word line, the central cloth should be laid flat and straight, and the center line should be drawn with a piece of powder. The central cloth should be stretched with white lines according to the word height (horizontal) or word width (vertical); Then, draw the word position and the word space from the middle to the two ends with a piece of powder, and pay attention to whether the center line of the cloth is the word position or the word space.
The outer lead of the four center lines of the characters shall be drawn with a piece of powder. The lead of the four center lines of the characters shall also be drawn on the paper type paper. The paper type shall be placed so that the four center lines of the paper are aligned with the four center lines of the cloth, and then the screen printing shall be placed in the center. Note: the scratched words shall be numbered and seated according to the number, so that even if the scratched words are scratched, they will not be wrong.